BALL VALVE,FULL JECKETING,150

PNO.	NOMENCLATURE	MATERIAL
1	BODY	CS / SS 304 / SS 316
2	SIDE PIECE	CS / SS 304 / SS 316
3	BALL	SS 304 / SS 316
4	GLAND	SS 304 / SS 316
5	STEM	SS 304 / SS 316
6	BODY SEAT	PTFE
7	STEM SEAT	PTFE
8	GLAND PACKING	PTFE
9	BODY SEAL	PTFE
10	STOPPER PLATE	CS / SS 304 / SS 316
11	GLAND NUT	CS / SS 304 / SS 316
12	DRIN PLUG	CS / SS 304 / SS 316
13	STUD-NUT & WASHER	ASTM A193 B7 / A194 2H
14	LEVER	CS / SS 304 / SS 316
15	JECKET	CS / SS 304 / SS 316
16	1/2″ INLET & OUTLET CONNECTION	CS / SS 304 / SS 316

SIZE	ØNB	A	ØF	FT	ØRF	‘P’	Ø’d’	‘N’	QTY.
25×50	24	127	152.4	15.9	92	120.6	19	4
50×80	49	177.8	190.5	19.1	127	152.4	19	4
80×100	75	203.2	228.6	23.9	157	190.5	19	8
100×150	98	228.6	279.4	25.4	216	241.3	22.2	8
150×200	148	266.7	343	28.6	270	298.5	22.2	8
200×250	198	292.1	406.4	30.2	324	362.0	25.4	12
250×300	248	330.2	482.6	31.8	381	431.8	25.4	12

NOTE :- ALL DIMENTION ARE IN MM UNLESS OTHERWISE SPECIFIED.

LIFT CHECK VALVE,FULL JACKETED,150#

BILL OF MATERIAL
PNO.	NOMENCLATURE	MATERIAL
1	BODY	CS / SS 304 / SS 316
2	COVER	CS / SS 304 / SS 316
3	DISC	SS 410 / SS 304 / SS 316
4	SEAT RING	SS 410 / SS 304 / SS 316
5	GUID PIN	SS 410 / SS 304 / SS 316
6	GASKET	SS SPIRAL WOUNDED
7	STUD / NUT	ASTM A 193 B7 / A 194 2H
8	JACKET	SS 410 / SS 304 / SS 316
9	1/2″ CONNECTION	SS 410 / SS 304 / SS 316
10	PLUG	SS 410 / SS 304 / SS 316

HYDRO TEST PRESSURE
SHELL	SEAT
32 kg/cm2	22 kg/cm2
Jacket pr.	10 kg/cm2

SIZE	ØNB	A	ØF	FT	ØRF	‘P’	Ø’d’	‘N’	QTY.
25×50	25.4	127	152.4	15.9	92	120.6	19	4
50×80	50.8	203.2	190.5	19.1	127	152.4	19	4
80×100	76.2	241.3	228.6	23.9	157	190.5	19	8
100×150	101.6	292.1	279.4	25.4	216	241.3	22.2	8
150×200	152.4	406.4	343	28.6	270	298.5	22.2	8
200×250	203.2	495.3	406.4	30.2	324	362.0	25.4	12
250×300	254	622.3	482.6	31.8	381	431.8	25.4	12

DESIGN & MFG. CODE	BS 1868
INSPECTION & TESTING	API 598
FACE TO FACE	ASME B 16.10
END CONNECTION	ASME B 16.5 R/F (ONE SIZE HIRE)
CLIENT	–
OP.O. NO.	–

NOTE :- ALL DIMENTION ARE IN MM UNLESS OTHERWISE SPECIFIED.

SWING CHECK VALVE,FULL JACKETING

BILL OF MATERIAL
PNO.	NOMENCLATURE	MATERIAL
1	BODY	CS / SS 304 / SS 316
2	COVER	CS / SS 304 / SS 316
3	DISC	SS 410 / SS 304 / SS 316
4	SEATRING	SS 410 / SS 304 / SS 316
5	HINGE PIN	SS 410 / SS 304 / SS 316
6	HINGE	CS / SS 304 / SS 316
7	PLUG (NOT SHOWN)	SS 410 / SS 304 / SS 316
8	DISC WASHER	SS 410 / SS 304 / SS 316
9	DISC NUT	SS 410 / SS 304 / SS 316
10	GASKET	SS SPIRAL WOUNDED
11	STUD	ASTM A 193 Gr.B7
12	NUT	ASTM A 194 Gr. 2H
13	LOCK PIN	SS 410 / SS 304 / SS 316
14	JACKET	CS / SS 304 / SS 316
15	1/2″ INLET & OUTLET CONNECTION	CS / SS 304 / SS 316
16	DRAIN PLUG	SS 410 / SS 304 / SS 316

HYDRO TEST PRESSURE
SHELL	SEAT
32 kg/cm2	22 kg/cm2
Jacket pr.	10 kg/cm2

SIZE	ØNB	A	ØF	FT	ØRF	‘P’	Ø’d’	‘N’	H	QTY.
25×50	25.4	127	152.4	15.9	92	120.6	19	4	105	–
50×80	50.8	203.2	190.5	19.1	127	152.4	19	4	130	–
80×100	76.2	241.3	228.6	23.9	157	190.5	19	8	160	–
100×150	101.6	292.1	279.4	25.4	216	241.3	22.2	8	215	–
150×200	152.4	355.6	343	28.6	270	298.5	22.2	8	225	–
200×250	203.2	495.3	406.4	30.2	324	362.0	25.4	12	265	–
250×300	254	622.3	482.6	31.8	381	431.8	25.4	12	325	–

CONTRUCTION	SWING CHECK VALVE,SWING TYPE DISC, RENEWABLE SEATRING AND BOLTED COVER OF JACKETING
DESIGN & MFG. CODE	ASME B16.34 & BS 1868
INSPECTION & TESTING	API 598 / BS 6755 PART 1
FACE TO FACE	ASME B 16.10
END CONNECTION	ASME B 16.5 R/F (ONE SIZE HIRE)
CLIENT	–
OP.O. NO.	–

NOTE :- ALL DIMENTION ARE IN MM UNLESS OTHERWISE SPECIFIED.

JACKETED PLUG VALVE

NOTE :- ALL DIMENTION ARE IN MM UNLESS OTHERWISE SPECIFIED.